Bumper and winch deal – Defender

€0,00 Incl. btw
Beschikbaarheid: Op voorraad (50)
Winch set met TDS-9.5 (c of i model) winch compleet met winch koord, roller fairleads, swing away pulley block, bedrading, batterijsleutel, draadloze afstands bediening, roterende trekogen en shackles en standaard winchbumper voor Land Rover Defender (zonder airco).
Upgrade met Dyneema Bow Rope en aluminium fairleads steeds mogelijk. 

TDS-9.5c or TDS-9.5i (bridge model), complete with wire rope, roller fairleads, swingaway pulley block, vehicle wiring kit, cut out switch and battery link, TDS Wireless Radio Remote, a pair of swivel recovery eyes and tested shackles, and a standard Defender, non air con Bumper  


Line Pull 9,500 lbs (4,309 kg)
Motor 5.0 HP (12 volt) 3.0 HP (24 volt)
Gear Train Heavy duty 3 stage planetary
Gear Ratio 173:1
Freespool Rotating Ring Gear
Braking Automatic Double Taper
Wire Rope Size 8.7mm x 30m (100’)
Dimensions 9.5i 612mm x 165mm x 250mm high
9.5c 612mm x 165mm x 266mm high
(Including Solenoids)
Drum Diameter 63.5mm (2.5”)
Drum Length 229mm (9”)
Weight with wire rope and
roller fairleads
50 kg
Weight with
Dyneema® Bowrope
and aluminium hawse
35 kg
Switching method 5m (17’) Rubber handheld remote
Switching mechanism Heavy duty sealed solenoids
Roller fairleads Standard
Swingaway pulley block Standard
Colour coded 1.5m wiring
harness
Standard
Alloy safety hooks fitted to
all ropes
Standard
PERFORMANCE
No load speed 56 feet/min (17m/min)
For 12 volt 40 amps
and 24 volt 23 amps

0 sterren op basis van 0 beoordelingen
Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergen Meer over cookies »