Improved load carrying and towing ability and ground clearance.
Do you use your Navara for load carrying and/or towing?
Then Pedders Suspension have the solution for you.
This kit features our excellent Pedders TrakRyder Foam Cell shocks, front coil springs, new rear leaf springs as well as the necessary bushes and U bolts to install them.
This kit is our first level heavy duty kit and is designed primarily to raise the vehicle and improve its load carrying and towing ability. If your Navara currently sits low at the rear when towing or load carrying, but you still also operate in the unladen condition, then this kit offer a significant improvement compared to the standard vehicle.
This kit improves the load carrying ability compared to the standard Nissan Navara rear spring whilst still allowing operation in the unladen state. However, our rear spring, combined with our specially valved shock, allows us to retain a level of ride comfort unladen comparable to the standard vehicle. For more information on how we achieve this, please see our technical pages.
This kit will raise the vehicle by approx. 40mm (see actual dimensions below) allowing better ground clearance and improved looks. Can be used to accommodate larger tyres. The dimensions quoted assume a standard vehicle. If you have additional equipment on board at the front such as a winch or bull bar, this will affect the final installed height. If this is the case, please contact us as it may be necessary to supply different springs for your application.
For those using the vehicle in a continuously laden state, please consider one of our heavy duty options.
The fully assembled Ezifit struts in this kit allow quick and easy fitment to your vehicle. These feature a Pedders Foam cell shock, Pedders spring as well as new top mount bump stop and boot. No need to use spring compressors or re-use any old parts. Simply bolt straight on.
These components replace the original items. No other modifications to the vehicle are necessary. After fitting we strongly recommend a wheel alignment is carried out for optimum performance of your vehicle.
Still not sure this is the correct kit for you? Have further questions? Then please do get in touch with one of our team here at 4WDSHOP who will be able to assist you.
- 2 Inch Lift Kit
- Improved load carrying and towing
- Increased Off-Road Ground Clearance
- Sintered Iron Piston Shocks with Large 40mm Bore
- Premium Grade Steel Coils
- All backed by our 2 year / 40,000km warranty
Vehicle Height Information
Front: 755mm with 16 inch wheels
Rear: Approx. 40mm higher than standard.
Notes: Heights should be measured as shown in the secondary picture.
Contents of Kit 803391
807308 - Pedders EziFit Foam Strut (280075)
6281 - Pedders Trakryder Leaf Spring
151211LT - Pedders Trakryder Long Travel Shock
EP8404 - Urethane Leaf Spring Eye Bush (4 PKT)
EP8405 - Urethane Leaf Spring Lower Shackle Bush (2PKT)
4382 - SQ U-bolt 62 x 14 x 185mm
||2WD & 4WD Leaf Over Axle